![]() ![]() When connected to a suitable power supply the Harrier IP Camera Interface Board will boot and then power-up the camera. Operation and features - Harrier IP Camera Interface Board The Harrier Ethernet Connection Board is fitted with a 9-way JST connector (J2) for connection to an external 10/100/1000M Ethernet connection/cable. The same supply will also power the Harrier IP Camera Interface Board via J1. The Harrier Ethernet Connection Board is fitted with a 4-way JST connector (J3) for connection to an external power supply. Specifications - Harrier Ethernet Connection Board The Harrier IP Camera Interface Board is fitted with a 12-way 0.5mm pitch FFC connector (J3) to enable connection to external/remote SD card sockets. The Harrier IP Camera Interface Board is fitted with a 10-way 0.8mm pitch connector to enable connection to a PELCO controller and mono microphone. ONVIF Profile S, IPv4/v6, HTTP, HTTPS, RTSP, RTP, TCP, UDP, RTCP, ICMP, DHCP ONVIF profile S compatible, VISCA (via Ethernet connection and ONVIF DeviceIO service) There is also a 12-way 0.5mm pitch FFC connector (J6) to enable connection to external/remote SD card sockets. ![]() The Harrier IP Camera Interface Board is fitted with a standard micro-SD socket (J5) that can accept cards of up to 512GB. ![]() The corresponding connector on the camera interface board is the same 30-way miniature connector that carries camera LVDS video signals. The Harrier IP Camera Interface Board is connected to the main camera module by a 100mm KEL cable. Specifications - Harrier IP Camera Interface Board The Harrier IP Camera Interface Board is compatible with all LVDS output cameras available at Active Silicon, offering IP connectivity also for models with global shutter functionality or up to 40x zoom.ġ080p/30, 1080p/25, 1080i/60, 1080i/50, 720p/60, 720p/50,720p/30, 720p/25, 1080p/60 (MP1110M only), 1080p/50 (MP1110M only)ĪTW1 (narrow), ATW2 (wide), one push, manual (B, R)Īuto, manual, priority mode (shutter / iris)ġ0x optical zoom f=3.3 to 33.0mm F1.8 to 3.4 The IP Ethernet video stream is provided by the Harrier IP Camera Interface Board. The Harrier IP Ethernet camera can be easily evaluated using the Evaluation Kit for Harrier IP. Application examples of how to add text/graphical overlays to the live video stream and send VISCA commands to the camera via the ONVIF media service are available on request. The web server hosts a control web page that can be used to control the board system and video output. The high-performance processor device on the Harrier IP Camera Interface Board supports ONVIF and web interfaces. Benefiting from Tamron’s high quality optical design and low reflection coating technologies, the camera offers color blur reduction, high contrast and many other sophisticated camera features. It is a high image-quality camera module with SMPTE 274M and SMPTE 296M compliant video output up to 1080p30 Full HD. This OEM camera solution is extremely compact, measuring only 69.4 x 37.6 x 41.5mm and weighing only 105g. Based on the Tamron MP1010M, this Ethernet IP autofocus-zoom camera is available with optical vibration compensation (-VC version), or without (-WP version). The Harrier 10x AF-Zoom IP Camera (Tamron MP1010M/MP1110M) comes with an 10x optical zoom and provides IP (Ethernet) video output with low latency H.264 RTP streaming.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |